Atlas – Hillsgun

Atlas Milling Machine Index Center Driver M1-204

admin — Mon, 03 Nov 2025 23:14:35 +0000

This is the driver M1-204 for the Atlas Milling Machine Index Center This is the “H” shaper driver that threads onto the indexing head spindle and the drive dog engages in this part. It is threaded 1-10 which is the threads on the index head spindle, it includes the set screws and the “pellet” that protects the spindle threads where the setscrew bears on the spindle. This is a newly manufactured part which we cast in aluminum as these parts are no longer available from the manufacturer.

Atlas Shaper Tool Holder S7-139

admin — Mon, 03 Nov 2025 23:13:21 +0000

This is our version of the S7-139 Tool Holder for the Atlas Shaper, This is a welded assembly which I show how to make in your shop using common materials on our u-tube channel. The version offered here is built with common cold roll steel so we can offer them at a reasonable cost and still offer good functionality in the home shop setting where it will be commonly used. As was the original the head can be swiveled and locked at any one of eight positions and uses a common 1/4″ high speed cutter bit (not included). This is a newly manufactured part as these parts are no longer available from the manufacturer.

Atlas Milling Machine M1-567 arbor driver

admin — Mon, 03 Nov 2025 23:13:21 +0000

This is the arbor driver that fits the Atlas/Craftsman milling machine . It is the driver that threads onto the milling machine spindle to drive the arbor. This is a newly manufactured reproduction which is then run thru my bluing tanks to help prevent corrosion and also to give a finished appearance. Made In The USA.

These are reproduction parts which I produce as I am trying to offer a lower cost alternative to the exorbinate prices they are being sold for on the auction sites.

you are purchasing one arbor driver.

Atlas Shaper Extension Tool Holder S7-315 (Boring Bar Holder)

admin — Mon, 03 Nov 2025 23:13:21 +0000

This is our version of the boring bar holder used to cut internal features such as keyways and splines on the Atlas Shaper, This is a welded assembly which I show how to make in your shop using common materials on our u-tube channel. The version offered here is built with common cold roll steel so we can offer them at a reasonable cost and still offer good functionality in the home shop setting where it will be commonly used. This is a newly manufactured part as these parts are no longer available from the manufacturer.

Atlas Shaper Guard S7-102

admin — Mon, 03 Nov 2025 23:12:23 +0000

This is the smaller guard that fits on the left side of the shaper and covers the motor/countershaft belt and pulleys. This is a newly manufactured part which we cast in aluminum as these parts are no longer available from the manufacturer.

Atlas Shaper Switch Mount Bracket S7-302G

admin — Mon, 03 Nov 2025 23:12:23 +0000

This is the switch mount bracket S7-302G which allows a square electrical box to be mounted on the side of the shaper where the original oval switch plate was installed, this is a plate which Atlas originally offered for some applications. This is a newly manufactured part which we cast in aluminum as these parts are no longer available from the manufacturer.

Atlas Milling Machine Drawbar M1-576

admin — Mon, 03 Nov 2025 23:12:23 +0000

This is the M1-576 draw bar for the Atlas milling machines, this draw bar is required for the M1-577 shank-cutter adapter as well as the M1-560 and 560L arbors.

Due to the lack of avalibility of the materials outlined in the purple text below I am at least for now producing these arbors from stainless steel, I feel that this substitution is just as durable and will give at least an equal service life as my previous offerings and while the material cost is higher than I was paying for the steel the difference is offset since it is not blued . This also includes the coned centering sleeve.

The main body of this drawbar is manufactured in 2 pieces which allows me to provide it at a lower cost than if it is turned from a single piece of stock (which the original was) also provided is the coned centering sleeve which helps center the drawbar at the rear of the spindle. this drawbar is turned from pre hardened steel and is then finished in my hot bluing tanks so that it will have a long lasting protective finish which I feel is much more pleasing than a raw steel look.

I have shown on my u-tube video the manufacture of one of these arbors as per the print (which is redily available) and have provided the information necessary for you to build your own if you choose. and the photos here are of that arbor. That video can be found here

Thank you for considering the Atlas products I offer, your support allows me to continue to offer replacement parts and accessories at a more reasonable cost than is normally found on the auction sites, as well as to produce videos on how you can build your own replacement parts for these machines to help make them affordable again. Thank you, Dan.

Atlas Shaper Guard S7-101

admin — Mon, 03 Nov 2025 23:12:23 +0000

This is the large guard that fits on the right side of the shaper and covers the drive belt and pulleys. This is a newly manufactured part which we cast in aluminum as these parts are no longer available from the manufacturer. This casting may take up to 7 business days to ship once ordered, at this time if they show in stock I have a casting done but it may not yet be machined and painted. Once I have caught up on all my castings they will hopefully be available for immediate shipment.

Atlas/Craftsman 9-42A 10″ & 12″ Lathe Tailstock Locknut Handle

admin — Mon, 03 Nov 2025 23:12:23 +0000

This is the handle that fits the 10″ & 12″ lathe tailstock. This is a newly manufactured reproduction turned from stainless steel to prevent corrosion. Made In The USA.

These are reproduction parts which I produce and are the same parts I show how to produce in my video series about how to make our Atlas machines affordable again by either producing your own parts for your machines, or I am trying to offer a lower cost alternative to the exorbinate prices they are being sold for on the auction sites.

Atlas Milling Machine M1-47 Lock Handle

admin — Mon, 03 Nov 2025 23:12:23 +0000

This is the lock handle that fits the Atlas/Craftsman milling machine . It is the lock handle which retains the arbor support bar. 2 are required on the machine. This is a newly manufactured reproduction which is cnc machined from stainless steel to prevent corrosion. Made In The USA.